Study of highly perturbed spacecraft formation dynamics via approximation

This paper explores methods for approximating and analyzing the dynamics of highly perturbed spacecraft formations with an emphasis on computationally efficient approaches. This facilitates on-board computation or rapid preliminary mission design analysis. Perturbed formation dynamics are often approximated as linear time-varying (LTV) systems, for which Floquet theory can be used to analyze the degree of system instability. Furthermore, the angular momentum of the relative orbital state can be computed with the approximate dynamics to provide additional insight. A general methodology is developed first and then applied to the problem of unstable formation dynamics in asteroid orbits. Here the dominant perturbative effects due to low-order gravitational harmonics and solar radiation pressure are modeled. Numerical simulations validate the approach and illustrate the approximation accuracy achieved.     

Fault mode probability factor based fault-tolerant control for dissimilar redundant actuation system

This paper presents a Fault Mode Probability Factor (FMPF) based Fault-Tolerant Control (FTC) strategy for multiple faults of Dissimilar Redundant Actuation System (DRAS) composed of Hydraulic Actuator (HA) and Electro-Hydrostatic Actuator (EHA). The long-term service and severe working conditions can result in multiple gradual faults which can ultimately degrade the system performance, resulting in the system model drift into the fault state characterized with parameter uncertainty. The paper proposes to address this problem by using the historical statistics of the multiple gradual faults and the proposed FMPF to amend the system model with parameter uncertainty. To balance the system model precision and computation time, a Moving Window (MW) method is used to determine the applied historical statistics. The FMPF based FTC strategy is developed for the amended system model where the system estimation and Linear Quadratic Regulator (LQR) are updated at the end of system sampling period. The simulations of DRAS system subjected to multiple faults have been performed and the results indicate the effectiveness of the proposed approach.     

反推力装置运动学与动力学仿真

为了研究叶栅式反推力装置各部件在工作过程中的运动学与动力学特性,根据机构运动原理对反推力装置进行简化并建立了运动学与动力学数学模型。以滑动整流罩位移与阻流门所受气动负荷为输入进行运动学与动力学仿真,得到了反推力装置各部件的位移、速度及受力特性曲线,并对比分析了在不同尺寸参数下各部件特征点的运动轨迹和反推力装置负载力变化。结果表明:运动学及动力学仿真结果与工程实际相符；反推力装置机构参数选择不合理时,各设计点会发生干涉现象并导致机构无法运动;机构参数变化对负载力最大值影响尤为突出,在阻流门AC段长度值增大6%,阻流门CB段长度值减小9%的情况下,负载力正向最大值将增大19.53%,负向最大值增大12.67%。研究方法及研究结果可为反推力装置运动学及动力学分析,以及为反推力装置机构优化设计提供参考。      

涡轮基组合循环发动机分布式控制系统通信网络混合拓扑结构优化方法

涡轮机组合循环(Turbine based combined cycle,TBCC)发动机控制系统通信网络拓扑结构是其分布式控制系统方案设计的重要部分,优化网络拓扑结构可提高发动机推重比和控制系统可靠性。本文基于智能优化算法提出TBCC分布式控制系统网络拓扑结构优化方法。基于图论建立TBCC几何模型和网格模型,以重量和可靠性为优化性能指标,同时考虑发动机表面高温区域以及控制节点的工作可靠性,分别采用粒子群算法和遗传算法优化星形结构中智能中央节点位置、中央节点的环形拓扑结构,获得星形-环形混合拓扑结构。仿真实例表明,基于本文方法优化所得的混合拓扑结构相较于星形集中式控制结构,系统重量降低了51.9%。     

Unsteady wakes-secondary flow interactions in a high-lift low-pressure turbine cascade

Detailed experimental measurements were conducted to study the interactions between incoming wakes and endwall secondary flow in a high-lift Low-Pressure Turbine (LPT) cascade. All of the measurements were conducted in both the presence and absence of incoming wakes, and numerical analysis was performed to elucidate the flow mechanism. With increasing Reynolds number, the influence of the incoming wakes on suppressing the secondary flow gradually increased owing to the greater influence of incoming wakes on reducing the negative incidence angle at higher Reynolds numbers, leading to a lower blade loading near the leading edge and suppression of the Pressure Side (PS) leg of the horseshoe vortex. However, the effect of unsteady wakes on suppressing the profile losses gradually became weaker owing to the reduced size of the Suction Side (SS) separation bubble and increased mixing loss in the free-flow region at high Reynolds numbers. Incoming wakes clearly improved the aerodynamic performance of the low-pressure turbine cascade at low Reynolds numbers of 25,000 and 50,000. In contrast, at the high Reynolds number of 100,000, the profile loss at the midspan and mass-averaged total losses downstream of the cascade were higher in the presence of wakes than in the absence of wakes, and the unsteady wakes exerted a negative influence on the aerodynamic performance of the LPT cascade.     

最小二乘直线函数的特性分析

证明了最小二乘直线函数是一种严格的凸函数。F(a,b)=∑(y-ax_i-b)~2是一个椭圆抛物面。a=[n∑x_iy_i-∑x_i∑y_i]/[n∑x_i^2-(∑x_i)~2]和b=[∑x_i^2∑y_i-∑x_i∑x_i∑y_i]/[n∑x_i^2-(∑x_i)~2]仅表示极值点。a=∑x_iy_i/∑x_i和 b=[∑x_i^2∑y_i-∑x_i∑x_iy_i]/[n∑x_i^2]在某些情况下可以是极值点,但不是在每种情况下都是极值点。     

线性规划问题的一个数值解法

通过用一组非线性方程组来逼近线性规划的Kuhn-mcker条件方程，从而将求解线性规划问题转化为一个用Newton迭代法来求解非线性方程组的问题。经数值计算表明，该算法在一般情况下能实现快速收敛。     

区域极点及方差约束下的航天器拦截控制：静态输出反馈情形

本文提出并讨论了具有选通窗约束的航天器拦截控制问题，指出航天器拦截控制的稳暂态性能指标可表现为系统稳态状态方差及闭环区域极点的形式。然后，基于配置控制的思想，本文完整地给出了期望静态反馈控制器的存在条件及其解析表达式，并举例说明所提设计方法的直接性与有效性     

双舌型挡板VGT蜗壳速度场的试验研究

使用IFA30 0热膜风速仪 ,通过选择合适的低通滤波器、合适的采样频率和采样时间 ,用X形探针测量了其无叶喷嘴出口速度的分布以及蜗壳流道的速度场。结果表明 :在两挡板全关时 ,喷嘴出口速度分布较均匀 ;随两挡板开度变化 ,喷嘴出口速度分布变化较大 ;而且沿蜗壳周向其径向速度分布较均匀 ,切向速度分布变化较大 ;沿蜗壳轴向 ,两者变化均较大。当两挡板开度变化时 ,蜗壳流道截面上通流速度的分布不同于自由涡流规律 ,二次流速度分量分布形态类似。     

内喷管间隙宽度对线性塞式喷管性能的影响

为了了解内喷管间隙宽度对线性塞式喷管性能的影响，提出了对应着同一个内喷管的三种不同间隙宽度的塞锥。采用数值模拟的方法，得到了不同间隙宽度的线性塞式喷管在不同工况下的流场和性能。比较了不同间隙宽度对线性塞式喷管性能的影响，结果表明：增加内喷管间隙会增大线性塞式喷管的面积比和设计压比；内喷管间隙变宽，塞锥表面的压强下降，塞式喷管的性能下降，间隙宽度增大一倍，塞式喷管性能下降1％～3％。另外在计算过程中发现，内喷管的性能是整个线性塞式喷管性能的主要组成部分，占了整个塞式喷管性能的三分之二以上。